BE THE LOCAL METAL
ROOFING EXPERT.

Durable Standing Seam Metal Roof Ridge Vents

  • Preserves Hidden
    Fastener Look

  • Efficient & Simple
    Installation

  • Lifetime Limited
    Warranty

Play Video

Are you frustrated with metal ridge vents that don’t properly ventilate roofs, don’t keep critters & precipitation out of the attic, or don’t work with standing seam roofs?

Our hidden fastener ridge vents are easy to install and last the lifetime of the roof!

  • Pre-cut lengths
  • Pre-punched fasteners
  • Pre-applied butyl tape
  • Foam protected by wire mesh for long-term critter protection Allows for proper attic ventilation
  • Increases your crew’s efficiency

How does the SnapZ vent help grow
your roofing business?

Minimize Callbacks

With long-term critter protection and durable materials, your customer’s attics have long-term protection.

Increase Crew Efficiency

Pre-cut lengths, pre-applied butyl tape, and pre-punched fasteners means your crew efficiency and profitability increases.

Protect Hidden Fastener Ridges

No more ruining a perfect standing seam roof -
our vents work perfectly with hidden fastener panels!

Want More Information?

Request your product catalog today!

Our standing seam ventilation products:

Snap-Z 1000™️

Made to fit 1" standing seam ribs

Snap-Z 1000

Specs:

  • .032 Aluminum
  • 26 Guage Steel
  • Snow Infiltration - 0
  • Withstands 110 MPH wind driven rain
  • Withstands 110 MPH winds
  • Net free area up to 12 sq. in. per linear foot of ridge
  • Air-flow: 730 cu. ft. per min. (per 10' ridge)
NTM_SS450SL_Profile

1" Snaplock Panel

snap z 2000 profile ssq210a

1" Mechanical Panel

NTM_FF150_Profile

1" Nail Flange Panel

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

NTM_SS450SL_Profile

1" Snaplock Panel

snap z 2000 profile ssq210a

1" Mechanical Panel

NTM_FF150_Profile

1" Nail Flange Panel

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

Snap-Z 1500™️

Made to fit 1-1/2" standing seam ribs

Snap-Z 1500

Specs:

  • .032 Aluminum
  • 26 Guage Steel
  • Snow Infiltration - 0
  • Withstands 110 MPH wind driven rain
  • Withstands 110 MPH winds
  • Net free area up to 16 sq. in. per linear foot of ridge
  • Air-flow: 730 cu. ft. per min. (per 10' ridge)
NTM_SS450SL_Profile

1-1/2" Snaplock Panel

NTM_SS150_Profile

1-1/2"" Mechanical Panel

NTM_SS550_Profile

1-1/2" Snaplock Panel

NTM_FF100_Profile

1-1/2" Nail Flange Panel

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

NTM_SS450SL_Profile

1-1/2" Snaplock Panel

NTM_SS150_Profile

1-1/2"" Mechanical Panel

NTM_SS550_Profile

1-1/2" Snaplock Panel

NTM_FF100_Profile

1-1/2" Nail Flange Panel

*Snap-Z works with, but is not limited to these panel types.

Florida Building Product Approval #: FL39250. Click here to verify.

Snap-Z 1750™️

Made to fit 1-3/4" standing seam ribs

Snap-Z 1750

Specs:

  • .032 Aluminum
  • 26 Guage Steel
  • Snow Infiltration - 0
  • Withstands 110 MPH wind driven rain
  • Withstands 110 MPH winds
  • Net free area up to 20 sq. in. per linear foot of ridge
  • Air-flow: 730 cu. ft. per min. (per 10' ridge)
NTM_SS675_Profile

1-3/4" Snaplock Panel

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

NTM_SS675_Profile

1-3/4" Snaplock Panel

*Snap-Z works with, but is not limited to these panel types.

Florida Building Product Approval #: FL39250. Click here to verify.

Snap-Z 2000™️

Made to fit 2" standing seam ribs

Snap-Z 2000

Specs:

  • .032 Aluminum
  • 26 Guage Steel
  • Snow Infiltration - 0
  • Withstands 110 MPH wind driven rain
  • Withstands 110 MPH winds
  • Net free area up to 24 sq. in. per linear foot of ridge
  • Air-flow: 730 cu. ft. per min. (per 10' ridge)
snap z 2000 profile ssq210a

2" Mechanical Panel
Type 210A

Snap z 2000 profile ssq275

2" Mechanical Panel
SSQ275

Snap z 2000 profile ssQ200

2" Mechanical Panel
Type 210

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

snap z 2000 profile ssq210a

2" Mechanical Panel
Type 210A

Snap z 2000 profile ssq275

2" Mechanical Panel
SSQ275

Snap z 2000 profile ssQ200

2" Mechanical Panel
Type 210

*Snap-Z works with, but is not limited to these panel types. 

Florida Building Product Approval #: FL39250. Click here to verify.

We make metal roof ventilation easy:

1.

Calculate
Your
Ridge

Give us the details for your roof ridge, including the inside measurements of your panels.

2.

Find
a
Dealer

Find your local dealer and get a quote for your roof.

3.

Receive
&
Install

Enjoy faster install times with pre-cut lengths & pre-punched fasteners. 

4.

Reduce
Your
Callbacks

Become the local metal roofing expert in your area and reduce your callbacks! 

Why use Snap-Z?

Satisfaction
Guaranteed

Limited Lifetime Warranty

Great Customer Service Is Our Focus

Trusted By Thousands Of Roofers Since 2015

What roofing contractors say...

Snap-Z Metal Roof Vent FAQs

Yes! All Snap-Z products are certified to be used in the State of Florida. Our Florida Building Product Approval # is FL39250. Click here to verify.

Absolutely! We cut SnapZ pieces to your exact specs (to 1/16”) so they are ready to install when they arrive.

Yes, our ridge roof vent has been tested by Intertek for wind, rain, and snow up to 110 mph.

Yes! Call us at 717-572-0910 to get custom pricing.

  • The ridge vents cut to size
  • Screening foam
  • Optional: Pre-applied butyl tape

If you order them pre-cut and with pre-applied butyl tape, then all you need is a screw gun and screws!

  1. Ridge vents are pre-cut to panel size; no on-site cutting required
  2. We can ship them with butyl tape pre-applied.
  3. They are conveniently shipped to your site or warehouse in 12”x12” boxes (lengths vary) via UPS Ground or Freight

The minimum is a 3/12 pitch, and there is no maximum.

The ridge roof vents are fire rated, but the the screening foam is not.

  1. It keeps the Snap-Z ridge roof vents firmly in place.
  2. The screws pin the standing seam panel at the top of the roof. This keeps the panels securely in place while still allowing for thermal expansion, and it also helps withstand movement due to wind and snow.

While we have several color options available, we recommend our standard black Snap-Z ridge vents. When installed correctly, the black vents look like a simple shadow line. For more information, see our blog post addressing why we recommend the black roof vent.

Because the screening foam is used with a metal ridge vent, critters cannot chew through the foam or pick it apart.

Snap-Z ridge roof vents allow proper ventilation in attics. In the winter time, this allows warm air in the attic to escape and keeps the attic cooler. Cooler attics and roofs reduce the freeze/thaw cycle which leads to ice dams.

Yes! Due to the ventilation that SnapZ allows, warm air in the summer is able to escape instead of remaining trapped in the attic. This keeps the attic cooler and your cooling bills lower.

The durable standing seam ridge vent your roof needs!

Many roofers have trouble finding a reliable ridge vent for hidden fastener roofs. At SnapZ, our pre-cut and pre-punched standing seam ridge vent minimizes callbacks and lasts the lifetime of the roof.

At SnapZ, we know you want to be a local metal roofing expert.

In order to do that, you need a metal roof ridge vent that lasts as long as the metal roofs you install.

The problem is that you can’t find a reliable hidden fastener ventilation system that is efficient to install and durable enough to keep out precipitation and critters long-term. 

We believe every roofer deserves access to a metal roof ridge vent that won’t result in headaches down the road. Because we understand how frustrating it is to find a reliable hidden fastener ridge vent, our national dealer network gets you the products you need in a timely manner.

We stand behind our product 100%, have a 20-year limited warranty, and have been trusted by thousands of roofers since 2015.

You don’t need to be frustrated with a ridge system that doesn’t work properly with hidden fastener systems. And you can stop having unhappy customers dealing with improper ventilation, hot attics, increased electric bills, or rain & critters in the attic.

Instead, work with SnapZ and experience: Minimal callbacks for your crew, proper ventilation in your customer’s attics, precipitation and critters kept out of the attic for the long-term, and increased crew efficiency - all while working with an easy-to-install ridge vent that works flawlessly with a hidden fastener roofing system!